The Ultimate Guide: Materials You Can Engrave with The Customizer Engraving Pen (Part 2)

Welcome back to our guide on the versatile materials you can engrave using The Customizer Engraving Pen. In Part 1, we explored common materials like wood, glass, metal, and plastic. In this continuation, we'll delve into even more unique surfaces, expanding your creative horizons and showcasing the endless possibilities with The Customizer.


  1. Concrete

Dragon engraved on concrete

@lokdar_et_sa_galerie_des_glass

Concrete might seem like an unusual choice, but it can be engraved to create artistic outdoor decorations or personalized paving stones.

Tips: Use carbide burrs for bold, deep lines. Work slowly to avoid chipping. Clean the surface thoroughly before starting. Pro tip: Have something handy to clean the dust as concrete tends to release a lot of material during engraving.


  1. Slate

Bug engraved on slate

@appelm0es

Engraving on slate can create beautiful signs and coasters with a rustic touch.

Tips: Use diamond bits for clean, precise lines. Slate can be fragile, so engrave gently to prevent breakage.


  1. Acrylic

Engraving on acrylic

@hummeline.art

Acrylic sheets and items can be engraved to make custom signs, awards, and decorative pieces.

Tips: Use diamond bits for detailed work. Engrave with light pressure to avoid cracking the acrylic. Pro tip: Mirror the design before engraving, so when you flip the acrylic, the textured lines are on the back, leaving the front smooth and sleek to the touch.


  1. Chalkboard

Chalkboard

Engraving on a chalkboard can add a permanent design or border, enhancing its decorative appeal.

Tips: Use fine-point bits for detailed designs. Clean the chalkboard surface before engraving to remove any dust.


  1. Soapstone

Engraving on soapstone

@alena_light

Soapstone is a soft, carvable stone perfect for engraving intricate designs.

Tips: Use carbide burrs for deep cuts and diamond bits for fine details. Keep the stone wet to reduce dust and keep the bit cool. Pro tip: Stone grinding bits are essential for working with this material, ensuring smooth, precise cuts.


  1. Terracotta

Terracotta craft engraved

@myermade

Engraving on terracotta pots and tiles can add a personalized touch to your garden or home decor.

Tips: Use diamond bits and work slowly to avoid chipping. Clean the surface before starting. Pro tip: It’s best if the terracotta isn’t glazed, as the glaze protects the surface and makes engraving more challenging. Unglazed terracotta engraves excellently with bits. Also, since it’s quite sandy, keep a cloth handy to manage the dust.


  1. Epoxy Resin

Epoxy resin engraving

Epoxy resin surfaces, such as tabletops and jewelry, can be engraved for a custom look.

Tips: Use fine-point diamond bits. Ensure the resin is fully cured before engraving to prevent smearing or damage. Pro tip: Standard bits may not work well on this material as it is more paste-like. Stone grinding bits or fine-tip bits are recommended to avoid clogging with worn material.


  1. Rubber

Rubber engraving

Engraving on rubber can be used to create custom stamps and mats.

Tips: Use fine-point bits for detailed designs. Engrave with light pressure to avoid tearing the rubber.


  1. Bamboo

Flowers engraved on bamboo

Engraving on bamboo items like cutting boards and utensils can add a personalized touch.

Tips: Use carbide burrs for deep cuts and diamond bits for fine details. Clean the surface before engraving.


  1. Brass

Engraving on brass

Brass items like nameplates and jewelry can be engraved to create elegant, custom pieces.

Tips: Use carbide burrs for deep cuts and diamond bits for fine details. Work slowly to prevent overheating.


  1. Fiberglass

Fiberglass

Engraving on fiberglass can customize boat parts, sports equipment, and more.

Tips: Use diamond bits and wear a mask to avoid inhaling fiberglass dust. Work slowly and carefully to prevent damage.


  1. Aluminum

Engraving on aluminum canvas
@alena_light

Aluminum items can be engraved to add a sleek, professional touch.

Tips: Use carbide burrs for bold lines and diamond bits for fine details. Engrave slowly to avoid overheating.


  1. Plexiglass

Plexiglass lamp engraved

@lokdar_et_sa_galerie_des_glass

Engraving on plexiglass can create clear, elegant designs for signs and displays.

Tips: Use diamond bits for clean lines. Engrave with light pressure to avoid cracking.


Tips and Tricks for Engraving

  • Stay Organized: Keep your engraving bits organized and clean to ensure they last longer and perform better.
  • Experiment: Don't be afraid to try new materials and techniques. The Customizer is versatile and can handle a variety of surfaces.
  • Protect Your Work Area: Use a mat or protective surface to avoid damaging your workspace while engraving.
  • Maintenance: Regularly clean your Customizer and bits to maintain their performance and longevity.

Did you miss Part I? Click here to check it out.

Back to Crafting blogs and guides

3 comments

Thank u for these tips. I still haven’t started but soon my craft room will b ready. I have a small stockpile of slate which I never thought of using. Now I really want to get started.
When using this wonderful tool, how far will the dust fly from origin. I’ve prepared a cardboard box to use it in, and of course I will have protection on my face and eyes.
Than you so much for these emails.
Lynda.

Lynda

Thanks for the list. Didn’t realize how many materials could be engraved.

Ed

Saving up to get my customised.Can,t wait to get started.

Dianna Ferrand-Nisbet

Leave a comment

Please note, comments must be approved before they are published